Search found 996 matches
- Wed 13 Oct 13 2010 9:30 pm
- Forum: Other Stuff
- Topic: Customizing the QNAP TS-259 Pro
- Replies: 11
- Views: 32126
Re: Customizing the QNAP TS-259 Pro
XMail configuration The SSL certificates are not available by default after installation. This means that all TLS operations on both SMTP and POP ports will fail. To fix this, we need to create the appropriate certificates in theL0 /share/MD0_DATA/.qpkg/XDove/xmail/var/MailRoot/ directory. This you...
- Wed 13 Oct 13 2010 6:17 pm
- Forum: Other Stuff
- Topic: Customizing the QNAP TS-259 Pro
- Replies: 11
- Views: 32126
Re: Customizing the QNAP TS-259 Pro
RAM Upgrade Three screws at the back and a stiff slide backwards removes the cover, giving access to the SO-DIMM DDR2 CL6 6400-800MHz 1GB Hynix (8-banks) RAM at the top. Releasing the catch you can slowly work the module out. This was replaced by a Kingston DDR2 CL6 6400-800MHz 2GB RAM (16-banks) w...
- Wed 13 Oct 13 2010 1:53 pm
- Forum: Support
- Topic: DragonOSD+ firmware upgrading
- Replies: 140
- Views: 295733
Version 13.9
Version 13.9
1. Added throttle mode option - OFF, PASSTHROUGH, and NORMAL/AP
Note: Settings and logs reset in this version.
Daniel
1. Added throttle mode option - OFF, PASSTHROUGH, and NORMAL/AP
Note: Settings and logs reset in this version.
Daniel
- Wed 13 Oct 13 2010 8:15 am
- Forum: Other Stuff
- Topic: Vessel and contract tracker
- Replies: 8
- Views: 19365
Vessel and contract tracker
Ports info now in MySQL. I'll have to see about a method to get the MSI number if available instead of IMO. Vessel dimensions may be available in e-mail so this could mean that there is no need to maintain a full vessels database. Fetchmail is pulling the mail off the aggregator and the parser seems...
- Tue 12 Oct 12 2010 8:44 pm
- Forum: Support
- Topic: DragonOSD+ firmware upgrading
- Replies: 140
- Views: 295733
Version 13.8
Version 13.8
1. Fixed some typos here and there
Daniel
1. Fixed some typos here and there
Daniel
- Sun 10 Oct 10 2010 3:57 pm
- Forum: Other Stuff
- Topic: Customizing the QNAP TS-259 Pro
- Replies: 11
- Views: 32126
Re: Customizing the QNAP TS-259 Pro
Fetchmail Installation ipkg install fetchmail mkdir /share/main/mail mkdir /share/main/mail/logs Edit the /opt/etc/fetchmailrc to contail:- set daemon 300 set postmaster 'mailfilter' set logfile '/share/main/mail/logs/fetchmail.log' poll mail.tsebi.com with protocol pop3 username 'aggregate' passwo...
- Sun 10 Oct 10 2010 2:19 pm
- Forum: Support
- Topic: DragonOSD+ firmware upgrading
- Replies: 140
- Views: 295733
Version 13.7
Version 13.7
** THIS IS A CRITICAL UPDATE **
1. Fixed stack overflow leading to resets
2. Fixed bootloader over-write issue with 13.6
Note: This version resets all settings to default and clears all logs.
Daniel
** THIS IS A CRITICAL UPDATE **
1. Fixed stack overflow leading to resets
2. Fixed bootloader over-write issue with 13.6
Note: This version resets all settings to default and clears all logs.
Daniel
- Thu 07 Oct 07 2010 3:36 pm
- Forum: Other Stuff
- Topic: Customizing the QNAP TS-259 Pro
- Replies: 11
- Views: 32126
Re: Customizing the QNAP TS-259 Pro
Also installed:- ipkg install coreutils ipkg install busybox ipkg install bash ipkg install rsync ipkg install mc ipkg install nail The next bit upgrades the shell and should be done after you install the new bash mv /bin/sh /bin/sh.old ln -s /opt/bin/bash /bin/sh This change doesn't seem to survive...
- Thu 07 Oct 07 2010 2:21 am
- Forum: Other Stuff
- Topic: Customizing the QNAP TS-259 Pro
- Replies: 11
- Views: 32126
Re: Customizing the QNAP TS-259 Pro
Setting up rsync from remote to local NAS On the remote machine (NAS, NAS2 or NAS3), edit /ffp/etc/rsyncd.conf to include a module section which defines one possible rsync job. File is attached. After changing the file, restart the rsync daemon using:- /ffp/start/rsyncd restart From the QNAP destin...
- Thu 07 Oct 07 2010 12:42 am
- Forum: Other Stuff
- Topic: Customizing the QNAP TS-259 Pro
- Replies: 11
- Views: 32126
Re: Customizing the QNAP TS-259 Pro
Install OpenSSH
Follow the instructions here:-
http://wiki.qnap.com/wiki/How_To_Replac ... th_OpenSSH
Note that autorun.sh may have already been updated with the necessary commands.
Daniel
Follow the instructions here:-
http://wiki.qnap.com/wiki/How_To_Replac ... th_OpenSSH
Note that autorun.sh may have already been updated with the necessary commands.
Daniel