Page 1 of 1

UHF R/C control Link - Thomas's hardware design

Posted: Wed 25 Feb 25 2009 9:00 pm
by Daniel Wee
This thread is to journal the developments made with this collaborative project with Thomas Scherrer (OZ2CPU).

Re: UHF R/C control Link - Thomas's hardware design

Posted: Thu 28 May 28 2009 9:48 pm
by Daniel Wee
Tried multiple configurations of code and diversity switching to try and resolve the problem with the low sensitivity when frequency hopping. All tests currently point out to the PLL in the Micrel module being too slow to support the rate of FHSS required to sustain the current data and frame rate. When not frequency hopping, sensitivity appears to be better so you have to choose between having FHSS robustness or having better sensitivity, but not both.

Daniel