Version 14.5
1. Internal fixes for waypoint handler
Daniel
DragonOSD+ firmware upgrading
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.5
- Attachments
-
- DOSD145.zip
- (115.14 KiB) Downloaded 4539 times
-
- DOSD145-V2.zip
- (115.14 KiB) Downloaded 4444 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.6
Version 14.6
1. Internal changes
Daniel
1. Internal changes
Daniel
- Attachments
-
- DOSD146.zip
- (115.14 KiB) Downloaded 4495 times
-
- DOSD146-V2.zip
- (115.14 KiB) Downloaded 4444 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.7
Version 14.7
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
- Attachments
-
- DOSD147.zip
- (115.06 KiB) Downloaded 4463 times
-
- DOSD147-V2.zip
- (115.06 KiB) Downloaded 4449 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.8
Version 14.8
1. Fixed waypoint operation. Removed leftover code.
Daniel
1. Fixed waypoint operation. Removed leftover code.
Daniel
- Attachments
-
- DOSD148.zip
- (115.03 KiB) Downloaded 4460 times
-
- DOSD148-V2.zip
- (115.03 KiB) Downloaded 4493 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.9
Version 14.9
1. Added compass mode 8.
Daniel
1. Added compass mode 8.
Daniel
- Attachments
-
- DOSD149.zip
- (115.01 KiB) Downloaded 4485 times
-
- DOSD149-V2.zip
- (115.01 KiB) Downloaded 4531 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.0
Version 15.0
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
- Attachments
-
- DOSD150.zip
- (116.08 KiB) Downloaded 4449 times
-
- DOSD150-V2.zip
- (115.92 KiB) Downloaded 4467 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.1
Version 15.1
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
- Attachments
-
- DOSD151.zip
- (116.14 KiB) Downloaded 4425 times
-
- DOSD151-V2.zip
- (115.41 KiB) Downloaded 4445 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.2
Version 15.2
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
- Attachments
-
- DOSD152.zip
- (115.67 KiB) Downloaded 4340 times
-
- DOSD152-V2.zip
- (116.61 KiB) Downloaded 4465 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.3
Version 15.3
1. Changed throttle control to use airspeed if available
Daniel
1. Changed throttle control to use airspeed if available
Daniel
- Attachments
-
- DOSD153.zip
- (115.74 KiB) Downloaded 4421 times
-
- DOSD153-V2.zip
- (116.63 KiB) Downloaded 4425 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.4
Version 15.4
1. Fixed Zero PSI type casting for menu display
Daniel
1. Fixed Zero PSI type casting for menu display
Daniel
- Attachments
-
- DOSD154.zip
- (115.74 KiB) Downloaded 4316 times
-
- DOSD154-V2.zip
- (116.63 KiB) Downloaded 4410 times