DragonOSD+ firmware upgrading

Support related stuff, for various products
Post Reply
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 7.5BETA15

1. Made some minor changes to TMP102 interface functions
2. Changed TMP102 detection sequence to allow more start-up delay
3. Added timeout counter - autopilot triggered if no PPM data - could cause problems for people not using PPM
4. Modified the PPM-frame qualifier
5. Changed VSI limit to 33m/s (or about 100ft/s)
6. Changed I2C error handling to not halt rest of system
7. Changed RCON handling
8. Added timeout to WAITACK and reinstated WAITACK
9. Changed temperature computation for TMP102 left-justified format
10. Added reset command to TMP102 initialization
11. Removed PPM qualifiers instated in V7.2
12. Removed AP activation on missing PPM
13. Changed WAITACK for longer timeout
14. Change TMP102 initialization parameters
15. Added GPS augmentation to stabilizer (highly experimental)
16. Fixed baro related timing bug
17. Removed unused items from menu
18. Changed terminal baudrate to 115200
19. Added new terminal data exchange protocol and commands
20. Added separate gain setting for GPS stabilizer
21. Expanded new protocol command set
22. Refined current sensing algorithm
23. Minor changes to autopilot default values
24. Changed syntax of serial commands

Note this version will revert to default settings so if you want to retain them, please copy them down somewhere.

Note also that from BETA14 onwards, you should change your ds30 Loader to indicate 115200 baud (instead of 38400) on the RESET and the TERMINAL tabs.

Daniel
Attachments
DOSD74BETA15.zip
(93.33 KiB) Downloaded 613 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 7.6

1. Added ability to safe FAILSAFE positions
2. Re-instated AP activation for when PPM disappears after being introduced in a valid way
3. Added mode checking for corrupt PPM frame
4. Added two modes for GPS passthrough on the serial port
5. Changed setval behaviour slightly
6. Added checks for invalid NMEA strings
7. Fixed cosmetic bug with barometric temperature display at start-up
8. Fixed HELP command
9. Fixed missing variables in SET and QUERY commands

Known issues:
1. TMP102 functions still not working
2. GPS stabilization still untested

Note: This version will revert to default settings. If you wish to preserve your settings, please copy them down.

Daniel
Attachments
DOSD76.zip
(93.98 KiB) Downloaded 608 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 7.7

1. Added more robust PPM frame checking
2. Change default throttle failsafe to 3% to be on the safe side of things
3. Will now indicate failsafe mode if PPM stream has a problem

Daniel
Attachments
DOSD77.zip
(94.23 KiB) Downloaded 601 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 7.8

1. Enabled failsafe function

Daniel
Attachments
DOSD78.zip
(94.17 KiB) Downloaded 595 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 7.9

1. Fixed, GPS stabilizer was being disabled if the auto-stabilizer gain was 0.0
2. Fixed, Callsign was being trashed by failsafe settings

Daniel
Attachments
DOSD79.zip
(94.17 KiB) Downloaded 607 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 8.01

1. Fixed RSSI computation for reversed high/low settings
2. Added slow recovery from failsafe, filters spurious frames
3. Expanded serial command set
4. Added debug functions

Daniel
Attachments
DOSD801.zip
(95.16 KiB) Downloaded 617 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 8.1

1. Changed, more robust failsafe handling

Daniel
Attachments
DOSD81.zip
(94.7 KiB) Downloaded 600 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 8.2

1. Added filtering to control channel during failsafe mode

Daniel
Attachments
DOSD82.zip
(94.74 KiB) Downloaded 623 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 8.3

1. Fixed some internal variables naming bugs
2. Expanded serial command-set

Daniel
Attachments
DOSD83.zip
(95.58 KiB) Downloaded 608 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 8.4

1. Added separate direction controls for use with menu navigation

Note: This version will revert to default settings. If you wish to preserve your existing settings, copy them down somewhere.

Daniel
Attachments
DOSD84.zip
(94.94 KiB) Downloaded 612 times
Post Reply