Version 14.5
1. Internal fixes for waypoint handler
Daniel
DragonOSD+ firmware upgrading
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.5
- Attachments
-
- DOSD145.zip
- (115.14 KiB) Downloaded 1638 times
-
- DOSD145-V2.zip
- (115.14 KiB) Downloaded 1556 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.6
Version 14.6
1. Internal changes
Daniel
1. Internal changes
Daniel
- Attachments
-
- DOSD146.zip
- (115.14 KiB) Downloaded 1643 times
-
- DOSD146-V2.zip
- (115.14 KiB) Downloaded 1622 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.7
Version 14.7
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
- Attachments
-
- DOSD147.zip
- (115.06 KiB) Downloaded 1586 times
-
- DOSD147-V2.zip
- (115.06 KiB) Downloaded 1595 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.8
Version 14.8
1. Fixed waypoint operation. Removed leftover code.
Daniel
1. Fixed waypoint operation. Removed leftover code.
Daniel
- Attachments
-
- DOSD148.zip
- (115.03 KiB) Downloaded 1570 times
-
- DOSD148-V2.zip
- (115.03 KiB) Downloaded 1605 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.9
Version 14.9
1. Added compass mode 8.
Daniel
1. Added compass mode 8.
Daniel
- Attachments
-
- DOSD149.zip
- (115.01 KiB) Downloaded 1596 times
-
- DOSD149-V2.zip
- (115.01 KiB) Downloaded 1598 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.0
Version 15.0
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
- Attachments
-
- DOSD150.zip
- (116.08 KiB) Downloaded 1528 times
-
- DOSD150-V2.zip
- (115.92 KiB) Downloaded 1699 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.1
Version 15.1
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
- Attachments
-
- DOSD151.zip
- (116.14 KiB) Downloaded 1551 times
-
- DOSD151-V2.zip
- (115.41 KiB) Downloaded 1583 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.2
Version 15.2
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
- Attachments
-
- DOSD152.zip
- (115.67 KiB) Downloaded 1530 times
-
- DOSD152-V2.zip
- (116.61 KiB) Downloaded 1588 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.3
Version 15.3
1. Changed throttle control to use airspeed if available
Daniel
1. Changed throttle control to use airspeed if available
Daniel
- Attachments
-
- DOSD153.zip
- (115.74 KiB) Downloaded 1588 times
-
- DOSD153-V2.zip
- (116.63 KiB) Downloaded 1578 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.4
Version 15.4
1. Fixed Zero PSI type casting for menu display
Daniel
1. Fixed Zero PSI type casting for menu display
Daniel
- Attachments
-
- DOSD154.zip
- (115.74 KiB) Downloaded 1440 times
-
- DOSD154-V2.zip
- (116.63 KiB) Downloaded 1519 times