Re: DragonOSD+ PC Commander - configuration utility
Posted: Mon 27 Dec 27 2010 12:51 pm
Interesting, but the splash screen is now disapearing as it probably should. lol
But... the check version error came back. Here's the log file dump. I ran the program at 11:43 and it worked fine. Closed it and then opened it up again at 11:50. Gave the software check error. Then ran the check again (without closing software) a few minutes later and it worked ok.
12/26/2010 11:43:10 PM Logfile cleared. New file started.
12/26/2010 11:43:10 PM Application Started...
12/26/2010 11:43:10 PM Operation System Information: Name = Windows XP, Edition = Professional, Service Pack = Service Pack 3, Version = 5.1.2600.196608, Bits = 32
12/26/2010 11:43:10 PM Software Version: 2.6
12/26/2010 11:43:10 PM Date Compiled: 26th December, 2010
12/26/2010 11:43:10 PM Developer: Craig Lister
12/26/2010 11:43:10 PM -- Entering LoadComPorts
12/26/2010 11:43:10 PM 3 ports located
12/26/2010 11:43:10 PM -- Exiting LoadComPorts
12/26/2010 11:43:10 PM Set COM port to
12/26/2010 11:43:25 PM Manual Software Check being started.
12/26/2010 11:43:25 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:43:25 PM Getting hardware version...
12/26/2010 11:43:25 PM Sending $Q DEVID...
12/26/2010 11:43:25 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:43:25 PM Got
12/26/2010 11:43:25 PM Getting Firmware Version...
12/26/2010 11:43:25 PM ERROR! Unable to send command '$V'
12/26/2010 11:43:25 PM Got
12/26/2010 11:43:25 PM Returning
12/26/2010 11:43:25 PM -- Exiting GetVersion
12/26/2010 11:43:25 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:43:25 PM WS Thread Started
12/26/2010 11:43:28 PM WS Thread Ended
12/26/2010 11:43:28 PM Recieved Successful Web Service Reply - Your PC Commander has the latest firmware (Version 2.6).
12/26/2010 11:49:53 PM User has selected to close the application.
12/26/2010 11:49:53 PM Application Terminating. Bye Bye.
12/26/2010 11:50:01 PM ***********************************************************************
12/26/2010 11:50:01 PM Application Started
12/26/2010 11:50:01 PM ***********************************************************************
12/26/2010 11:50:01 PM Verbose logging is Off
12/26/2010 11:50:01 PM Splash Shown
12/26/2010 11:50:04 PM Splash Hidden
12/26/2010 11:50:05 PM -- Configuration Object Created
12/26/2010 11:50:05 PM -- Entering BuildOSDTypes
12/26/2010 11:50:05 PM Loaded 14 types..
12/26/2010 11:50:05 PM -- Exiting BuildOSDTypes
12/26/2010 11:50:05 PM -- Entering BuildKnownOptions
12/26/2010 11:50:05 PM Loaded 146 known parameters.
12/26/2010 11:50:05 PM -- Exiting BuildKnownOptions
12/26/2010 11:50:05 PM -- Configuration Object Constructor Complete
12/26/2010 11:50:05 PM Application Started...
12/26/2010 11:50:05 PM Operation System Information: Name = Windows XP, Edition = Professional, Service Pack = Service Pack 3, Version = 5.1.2600.196608, Bits = 32
12/26/2010 11:50:05 PM Software Version: 2.6
12/26/2010 11:50:05 PM Date Compiled: 26th December, 2010
12/26/2010 11:50:05 PM Developer: Craig Lister
12/26/2010 11:50:05 PM -- Entering LoadComPorts
12/26/2010 11:50:05 PM 3 ports located
12/26/2010 11:50:05 PM -- Exiting LoadComPorts
12/26/2010 11:50:05 PM Set COM port to
12/26/2010 11:50:11 PM Manual Software Check being started.
12/26/2010 11:50:11 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:50:11 PM Getting hardware version...
12/26/2010 11:50:11 PM Sending $Q DEVID...
12/26/2010 11:50:11 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:50:11 PM Got
12/26/2010 11:50:11 PM Getting Firmware Version...
12/26/2010 11:50:11 PM ERROR! Unable to send command '$V'
12/26/2010 11:50:11 PM Got
12/26/2010 11:50:11 PM Returning
12/26/2010 11:50:11 PM -- Exiting GetVersion
12/26/2010 11:50:11 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:50:11 PM WS Thread Started
12/26/2010 11:50:13 PM WS Thread Ended
12/26/2010 11:50:13 PM ERROR: Recieved Failed Web Service Reply - ReplyDescription=[], CommandError=[Failed to process command.Object reference not set to an instance of an object.], CommunicationError=[]
12/26/2010 11:53:21 PM Manual Software Check being started.
12/26/2010 11:53:21 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:53:21 PM Getting hardware version...
12/26/2010 11:53:21 PM Sending $Q DEVID...
12/26/2010 11:53:21 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:53:21 PM Got
12/26/2010 11:53:21 PM Getting Firmware Version...
12/26/2010 11:53:21 PM ERROR! Unable to send command '$V'
12/26/2010 11:53:21 PM Got
12/26/2010 11:53:21 PM Returning
12/26/2010 11:53:21 PM -- Exiting GetVersion
12/26/2010 11:53:21 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:53:21 PM WS Thread Started
12/26/2010 11:53:23 PM WS Thread Ended
12/26/2010 11:53:23 PM Recieved Successful Web Service Reply - Your PC Commander has the latest firmware (Version 2.6).
12/26/2010 11:53:25 PM User has selected to close the application.
12/26/2010 11:53:25 PM Application Terminating. Bye Bye.
But... the check version error came back. Here's the log file dump. I ran the program at 11:43 and it worked fine. Closed it and then opened it up again at 11:50. Gave the software check error. Then ran the check again (without closing software) a few minutes later and it worked ok.
12/26/2010 11:43:10 PM Logfile cleared. New file started.
12/26/2010 11:43:10 PM Application Started...
12/26/2010 11:43:10 PM Operation System Information: Name = Windows XP, Edition = Professional, Service Pack = Service Pack 3, Version = 5.1.2600.196608, Bits = 32
12/26/2010 11:43:10 PM Software Version: 2.6
12/26/2010 11:43:10 PM Date Compiled: 26th December, 2010
12/26/2010 11:43:10 PM Developer: Craig Lister
12/26/2010 11:43:10 PM -- Entering LoadComPorts
12/26/2010 11:43:10 PM 3 ports located
12/26/2010 11:43:10 PM -- Exiting LoadComPorts
12/26/2010 11:43:10 PM Set COM port to
12/26/2010 11:43:25 PM Manual Software Check being started.
12/26/2010 11:43:25 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:43:25 PM Getting hardware version...
12/26/2010 11:43:25 PM Sending $Q DEVID...
12/26/2010 11:43:25 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:43:25 PM Got
12/26/2010 11:43:25 PM Getting Firmware Version...
12/26/2010 11:43:25 PM ERROR! Unable to send command '$V'
12/26/2010 11:43:25 PM Got
12/26/2010 11:43:25 PM Returning
12/26/2010 11:43:25 PM -- Exiting GetVersion
12/26/2010 11:43:25 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:43:25 PM WS Thread Started
12/26/2010 11:43:28 PM WS Thread Ended
12/26/2010 11:43:28 PM Recieved Successful Web Service Reply - Your PC Commander has the latest firmware (Version 2.6).
12/26/2010 11:49:53 PM User has selected to close the application.
12/26/2010 11:49:53 PM Application Terminating. Bye Bye.
12/26/2010 11:50:01 PM ***********************************************************************
12/26/2010 11:50:01 PM Application Started
12/26/2010 11:50:01 PM ***********************************************************************
12/26/2010 11:50:01 PM Verbose logging is Off
12/26/2010 11:50:01 PM Splash Shown
12/26/2010 11:50:04 PM Splash Hidden
12/26/2010 11:50:05 PM -- Configuration Object Created
12/26/2010 11:50:05 PM -- Entering BuildOSDTypes
12/26/2010 11:50:05 PM Loaded 14 types..
12/26/2010 11:50:05 PM -- Exiting BuildOSDTypes
12/26/2010 11:50:05 PM -- Entering BuildKnownOptions
12/26/2010 11:50:05 PM Loaded 146 known parameters.
12/26/2010 11:50:05 PM -- Exiting BuildKnownOptions
12/26/2010 11:50:05 PM -- Configuration Object Constructor Complete
12/26/2010 11:50:05 PM Application Started...
12/26/2010 11:50:05 PM Operation System Information: Name = Windows XP, Edition = Professional, Service Pack = Service Pack 3, Version = 5.1.2600.196608, Bits = 32
12/26/2010 11:50:05 PM Software Version: 2.6
12/26/2010 11:50:05 PM Date Compiled: 26th December, 2010
12/26/2010 11:50:05 PM Developer: Craig Lister
12/26/2010 11:50:05 PM -- Entering LoadComPorts
12/26/2010 11:50:05 PM 3 ports located
12/26/2010 11:50:05 PM -- Exiting LoadComPorts
12/26/2010 11:50:05 PM Set COM port to
12/26/2010 11:50:11 PM Manual Software Check being started.
12/26/2010 11:50:11 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:50:11 PM Getting hardware version...
12/26/2010 11:50:11 PM Sending $Q DEVID...
12/26/2010 11:50:11 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:50:11 PM Got
12/26/2010 11:50:11 PM Getting Firmware Version...
12/26/2010 11:50:11 PM ERROR! Unable to send command '$V'
12/26/2010 11:50:11 PM Got
12/26/2010 11:50:11 PM Returning
12/26/2010 11:50:11 PM -- Exiting GetVersion
12/26/2010 11:50:11 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:50:11 PM WS Thread Started
12/26/2010 11:50:13 PM WS Thread Ended
12/26/2010 11:50:13 PM ERROR: Recieved Failed Web Service Reply - ReplyDescription=[], CommandError=[Failed to process command.Object reference not set to an instance of an object.], CommunicationError=[]
12/26/2010 11:53:21 PM Manual Software Check being started.
12/26/2010 11:53:21 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:53:21 PM Getting hardware version...
12/26/2010 11:53:21 PM Sending $Q DEVID...
12/26/2010 11:53:21 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:53:21 PM Got
12/26/2010 11:53:21 PM Getting Firmware Version...
12/26/2010 11:53:21 PM ERROR! Unable to send command '$V'
12/26/2010 11:53:21 PM Got
12/26/2010 11:53:21 PM Returning
12/26/2010 11:53:21 PM -- Exiting GetVersion
12/26/2010 11:53:21 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:53:21 PM WS Thread Started
12/26/2010 11:53:23 PM WS Thread Ended
12/26/2010 11:53:23 PM Recieved Successful Web Service Reply - Your PC Commander has the latest firmware (Version 2.6).
12/26/2010 11:53:25 PM User has selected to close the application.
12/26/2010 11:53:25 PM Application Terminating. Bye Bye.