Setting up ESP-link
Posted: Thu 03 Aug 03 2017 9:39 pm
Flashing EPS-link to ESP8266 (ESP-12) 4MB
Instructions in this video:-
https://www.youtube.com/watch?v=MyX8bMJpuiE
Download appropriate ESP-link image - in this case 3.0.14:-
https://github.com/jeelabs/esp-link/releases
http://s3.voneicken.com/esp-link/esp-li ... 63ffbb.tgz
Extract all files to a known directory.
Get the NODEMCU-flasher tool (64-bit version in this case):-
https://github.com/nodemcu/nodemcu-flas ... 64/Release
Set it up as per:-
boot_v1.6.bin 0x00000
blank.bin 0x3FE000
esp_init_data_default.bin 0x3FC000
user1.bin 0x01000
Check the tickboxes for all 4-files.
Set ESP8266 into bootstrap mode.
Flash the file.
Instructions in this video:-
https://www.youtube.com/watch?v=MyX8bMJpuiE
Download appropriate ESP-link image - in this case 3.0.14:-
https://github.com/jeelabs/esp-link/releases
http://s3.voneicken.com/esp-link/esp-li ... 63ffbb.tgz
Extract all files to a known directory.
Get the NODEMCU-flasher tool (64-bit version in this case):-
https://github.com/nodemcu/nodemcu-flas ... 64/Release
Set it up as per:-
boot_v1.6.bin 0x00000
blank.bin 0x3FE000
esp_init_data_default.bin 0x3FC000
user1.bin 0x01000
Check the tickboxes for all 4-files.
Set ESP8266 into bootstrap mode.
Flash the file.