Version 14.5
1. Internal fixes for waypoint handler
Daniel
DragonOSD+ firmware upgrading
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.5
- Attachments
-
- DOSD145.zip
- (115.14 KiB) Downloaded 1664 times
-
- DOSD145-V2.zip
- (115.14 KiB) Downloaded 1586 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.6
Version 14.6
1. Internal changes
Daniel
1. Internal changes
Daniel
- Attachments
-
- DOSD146.zip
- (115.14 KiB) Downloaded 1668 times
-
- DOSD146-V2.zip
- (115.14 KiB) Downloaded 1648 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.7
Version 14.7
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
- Attachments
-
- DOSD147.zip
- (115.06 KiB) Downloaded 1615 times
-
- DOSD147-V2.zip
- (115.06 KiB) Downloaded 1624 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.8
Version 14.8
1. Fixed waypoint operation. Removed leftover code.
Daniel
1. Fixed waypoint operation. Removed leftover code.
Daniel
- Attachments
-
- DOSD148.zip
- (115.03 KiB) Downloaded 1607 times
-
- DOSD148-V2.zip
- (115.03 KiB) Downloaded 1640 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.9
Version 14.9
1. Added compass mode 8.
Daniel
1. Added compass mode 8.
Daniel
- Attachments
-
- DOSD149.zip
- (115.01 KiB) Downloaded 1626 times
-
- DOSD149-V2.zip
- (115.01 KiB) Downloaded 1633 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.0
Version 15.0
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
- Attachments
-
- DOSD150.zip
- (116.08 KiB) Downloaded 1553 times
-
- DOSD150-V2.zip
- (115.92 KiB) Downloaded 1735 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.1
Version 15.1
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
- Attachments
-
- DOSD151.zip
- (116.14 KiB) Downloaded 1585 times
-
- DOSD151-V2.zip
- (115.41 KiB) Downloaded 1607 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.2
Version 15.2
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
- Attachments
-
- DOSD152.zip
- (115.67 KiB) Downloaded 1557 times
-
- DOSD152-V2.zip
- (116.61 KiB) Downloaded 1611 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.3
Version 15.3
1. Changed throttle control to use airspeed if available
Daniel
1. Changed throttle control to use airspeed if available
Daniel
- Attachments
-
- DOSD153.zip
- (115.74 KiB) Downloaded 1626 times
-
- DOSD153-V2.zip
- (116.63 KiB) Downloaded 1599 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.4
Version 15.4
1. Fixed Zero PSI type casting for menu display
Daniel
1. Fixed Zero PSI type casting for menu display
Daniel
- Attachments
-
- DOSD154.zip
- (115.74 KiB) Downloaded 1468 times
-
- DOSD154-V2.zip
- (116.63 KiB) Downloaded 1547 times