Version 14.5
1. Internal fixes for waypoint handler
Daniel
DragonOSD+ firmware upgrading
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.5
- Attachments
-
- DOSD145.zip
- (115.14 KiB) Downloaded 3624 times
-
- DOSD145-V2.zip
- (115.14 KiB) Downloaded 3508 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.6
Version 14.6
1. Internal changes
Daniel
1. Internal changes
Daniel
- Attachments
-
- DOSD146.zip
- (115.14 KiB) Downloaded 3610 times
-
- DOSD146-V2.zip
- (115.14 KiB) Downloaded 3566 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.7
Version 14.7
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
1. Modified general EEPROM read/write routine to exclude waypoints
Daniel
- Attachments
-
- DOSD147.zip
- (115.06 KiB) Downloaded 3550 times
-
- DOSD147-V2.zip
- (115.06 KiB) Downloaded 3545 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.8
Version 14.8
1. Fixed waypoint operation. Removed leftover code.
Daniel
1. Fixed waypoint operation. Removed leftover code.
Daniel
- Attachments
-
- DOSD148.zip
- (115.03 KiB) Downloaded 3501 times
-
- DOSD148-V2.zip
- (115.03 KiB) Downloaded 3578 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 14.9
Version 14.9
1. Added compass mode 8.
Daniel
1. Added compass mode 8.
Daniel
- Attachments
-
- DOSD149.zip
- (115.01 KiB) Downloaded 3552 times
-
- DOSD149-V2.zip
- (115.01 KiB) Downloaded 3635 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.0
Version 15.0
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
1. Added command to update home position serially for dynamic ground station locations
2. Added extra info in diagnostic screen
Daniel
- Attachments
-
- DOSD150.zip
- (116.08 KiB) Downloaded 3496 times
-
- DOSD150-V2.zip
- (115.92 KiB) Downloaded 3535 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.1
Version 15.1
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
1. Added option to adjust air-speed sensor calibration
2. PWM outputs defaults to 1.0ms (-100%). Watch attached servos
Note: This version will reset all settings to default values. If you wish to retain existing settings, save them with PC Commander before updating the firmware.
Daniel
- Attachments
-
- DOSD151.zip
- (116.14 KiB) Downloaded 3516 times
-
- DOSD151-V2.zip
- (115.41 KiB) Downloaded 3504 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.2
Version 15.2
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
1. Fixed bug in data downlink routine - coordinate polarity
Daniel
- Attachments
-
- DOSD152.zip
- (115.67 KiB) Downloaded 3414 times
-
- DOSD152-V2.zip
- (116.61 KiB) Downloaded 3525 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.3
Version 15.3
1. Changed throttle control to use airspeed if available
Daniel
1. Changed throttle control to use airspeed if available
Daniel
- Attachments
-
- DOSD153.zip
- (115.74 KiB) Downloaded 3513 times
-
- DOSD153-V2.zip
- (116.63 KiB) Downloaded 3508 times
-
- Site Admin
- Posts: 2449
- Joined: Wed 25 Feb 25 2009 8:00 pm
Version 15.4
Version 15.4
1. Fixed Zero PSI type casting for menu display
Daniel
1. Fixed Zero PSI type casting for menu display
Daniel
- Attachments
-
- DOSD154.zip
- (115.74 KiB) Downloaded 3440 times
-
- DOSD154-V2.zip
- (116.63 KiB) Downloaded 3490 times