DragonOSD+ PC Commander - configuration utility

Support related stuff, for various products
Post Reply
twinturbostang
Posts: 6
Joined: Tue 31 Aug 31 2010 12:05 am

Re: DragonOSD+ PC Commander - configuration utility

Post by twinturbostang »

Interesting, but the splash screen is now disapearing as it probably should. lol

But... the check version error came back. Here's the log file dump. I ran the program at 11:43 and it worked fine. Closed it and then opened it up again at 11:50. Gave the software check error. Then ran the check again (without closing software) a few minutes later and it worked ok.


12/26/2010 11:43:10 PM Logfile cleared. New file started.
12/26/2010 11:43:10 PM Application Started...
12/26/2010 11:43:10 PM Operation System Information: Name = Windows XP, Edition = Professional, Service Pack = Service Pack 3, Version = 5.1.2600.196608, Bits = 32
12/26/2010 11:43:10 PM Software Version: 2.6
12/26/2010 11:43:10 PM Date Compiled: 26th December, 2010
12/26/2010 11:43:10 PM Developer: Craig Lister
12/26/2010 11:43:10 PM -- Entering LoadComPorts
12/26/2010 11:43:10 PM 3 ports located
12/26/2010 11:43:10 PM -- Exiting LoadComPorts
12/26/2010 11:43:10 PM Set COM port to
12/26/2010 11:43:25 PM Manual Software Check being started.
12/26/2010 11:43:25 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:43:25 PM Getting hardware version...
12/26/2010 11:43:25 PM Sending $Q DEVID...
12/26/2010 11:43:25 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:43:25 PM Got
12/26/2010 11:43:25 PM Getting Firmware Version...
12/26/2010 11:43:25 PM ERROR! Unable to send command '$V'
12/26/2010 11:43:25 PM Got
12/26/2010 11:43:25 PM Returning
12/26/2010 11:43:25 PM -- Exiting GetVersion
12/26/2010 11:43:25 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:43:25 PM WS Thread Started
12/26/2010 11:43:28 PM WS Thread Ended
12/26/2010 11:43:28 PM Recieved Successful Web Service Reply - Your PC Commander has the latest firmware (Version 2.6).
12/26/2010 11:49:53 PM User has selected to close the application.
12/26/2010 11:49:53 PM Application Terminating. Bye Bye.
12/26/2010 11:50:01 PM ***********************************************************************
12/26/2010 11:50:01 PM Application Started
12/26/2010 11:50:01 PM ***********************************************************************
12/26/2010 11:50:01 PM Verbose logging is Off
12/26/2010 11:50:01 PM Splash Shown
12/26/2010 11:50:04 PM Splash Hidden
12/26/2010 11:50:05 PM -- Configuration Object Created
12/26/2010 11:50:05 PM -- Entering BuildOSDTypes
12/26/2010 11:50:05 PM Loaded 14 types..
12/26/2010 11:50:05 PM -- Exiting BuildOSDTypes
12/26/2010 11:50:05 PM -- Entering BuildKnownOptions
12/26/2010 11:50:05 PM Loaded 146 known parameters.
12/26/2010 11:50:05 PM -- Exiting BuildKnownOptions
12/26/2010 11:50:05 PM -- Configuration Object Constructor Complete
12/26/2010 11:50:05 PM Application Started...
12/26/2010 11:50:05 PM Operation System Information: Name = Windows XP, Edition = Professional, Service Pack = Service Pack 3, Version = 5.1.2600.196608, Bits = 32
12/26/2010 11:50:05 PM Software Version: 2.6
12/26/2010 11:50:05 PM Date Compiled: 26th December, 2010
12/26/2010 11:50:05 PM Developer: Craig Lister
12/26/2010 11:50:05 PM -- Entering LoadComPorts
12/26/2010 11:50:05 PM 3 ports located
12/26/2010 11:50:05 PM -- Exiting LoadComPorts
12/26/2010 11:50:05 PM Set COM port to
12/26/2010 11:50:11 PM Manual Software Check being started.
12/26/2010 11:50:11 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:50:11 PM Getting hardware version...
12/26/2010 11:50:11 PM Sending $Q DEVID...
12/26/2010 11:50:11 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:50:11 PM Got
12/26/2010 11:50:11 PM Getting Firmware Version...
12/26/2010 11:50:11 PM ERROR! Unable to send command '$V'
12/26/2010 11:50:11 PM Got
12/26/2010 11:50:11 PM Returning
12/26/2010 11:50:11 PM -- Exiting GetVersion
12/26/2010 11:50:11 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:50:11 PM WS Thread Started
12/26/2010 11:50:13 PM WS Thread Ended
12/26/2010 11:50:13 PM ERROR: Recieved Failed Web Service Reply - ReplyDescription=[], CommandError=[Failed to process command.Object reference not set to an instance of an object.], CommunicationError=[]
12/26/2010 11:53:21 PM Manual Software Check being started.
12/26/2010 11:53:21 PM ERROR! Unable to send command '$UIDR'
12/26/2010 11:53:21 PM Getting hardware version...
12/26/2010 11:53:21 PM Sending $Q DEVID...
12/26/2010 11:53:21 PM ERROR! Unable to send command '$Q DEVID'
12/26/2010 11:53:21 PM Got
12/26/2010 11:53:21 PM Getting Firmware Version...
12/26/2010 11:53:21 PM ERROR! Unable to send command '$V'
12/26/2010 11:53:21 PM Got
12/26/2010 11:53:21 PM Returning
12/26/2010 11:53:21 PM -- Exiting GetVersion
12/26/2010 11:53:21 PM Sending Web Service Request - CHECK_IS_LATEST_SOFTWARE
12/26/2010 11:53:21 PM WS Thread Started
12/26/2010 11:53:23 PM WS Thread Ended
12/26/2010 11:53:23 PM Recieved Successful Web Service Reply - Your PC Commander has the latest firmware (Version 2.6).
12/26/2010 11:53:25 PM User has selected to close the application.
12/26/2010 11:53:25 PM Application Terminating. Bye Bye.
Cralis
Posts: 112
Joined: Sat 29 May 29 2010 9:01 pm

Version 2.7

Post by Cralis »

PC Commander version 2.7 has been released.

Updates include:

[*] There was an issue when you disconnect and try to reconnect. This is resolved.
[*] Rebooting the device from PC Commander is now easier. No need for a manual reconnection.
[*] Increased the presision of the Voltage display in the Overview screen to 3 digits.
[*] Downloading firmware should be working 100% now.
You do not have the required permissions to view the files attached to this post.
Cralis
Posts: 112
Joined: Sat 29 May 29 2010 9:01 pm

Version 2,8

Post by Cralis »

PC Commander version 2.8 has been uploaded.

I have added PC Commander Download option. So, when PC Commander sees there's a new version available, you can now download it from within PC Commander. The files get downloaded to a folder that you select. You must then close PC Commander and run the setup that you just downloaded.

Actually, you need to uninstall first. :( Will try resolve that.
You do not have the required permissions to view the files attached to this post.
Cralis
Posts: 112
Joined: Sat 29 May 29 2010 9:01 pm

Version 2.9

Post by Cralis »

PC Commander version 2.8 has been uploaded.

This contains a small fix for the GPS download. Sometimes a sample is empty. This version detects that and stops an application crash.
You do not have the required permissions to view the files attached to this post.
Cralis
Posts: 112
Joined: Sat 29 May 29 2010 9:01 pm

Version 2.11

Post by Cralis »

PC Commander version 2.11 is available.

An attempt to fix more strange GPS logged data.
You do not have the required permissions to view the files attached to this post.
Post Reply